How to Fix: You Need to Format The Disk Raw Before You Can Use It

“When you insert an external hard drive into your local machine and try to access the files on it if you pop up an error message i.e., “You need to format the disk raw”, what would you do in this situation. At this time you need a permanent solution to resolve this error. In this article will going to provide you an instant guide to fix you need to format the disk before you can use it raw.”

In today’s arena, computers are basic in personal or professional use. Usually, people use the desktop in their daily routine or at their workplace. They may have some important files or folders stored in their hard drive. But a common and cumbersome problem with computers is the sudden and apparently abnormal disappearance of a hard disk that has been functioning appropriately. It can be a shocking experience to unexpectedly be told that your data, often irreplaceable documents, pictures, and videos, might be gone forever.


The external hard drive becomes very useful when you need to copy large files between computers or back up your valuable files like photos, videos, documents, and other data. They are typically having a large capacity and can be connected to any machine through USB port or FireWire.

Most of the times, a user face an occurrence of an error message such as “you need to format the disk raw”. If you are also asked to format the disk when you plug in the external device like USB flash drive, SD card, in case data loss, do not format disk immediately. In some cases, the device still will not work even after that was formatted. So, in this article, we are going to discuss the manual and professional solution to fix this error in an appropriate manner. Initially, go through the below-outlined scenario that will you to understand more about this error. The query is taken from the forum site:

User’s Query

“I have a 4TB external hard drive that all of a sudden tells me it requires to be formatted. I have a total of 3.8 TB of files, pictures, videos and much more on that drive without any backups of it anywhere. So basically, when it is plugged in, every 5 to 10 seconds or so it disappears and then again reappears with this pop-up message: “You need to format the disk in drive F: before you can utilize it. Do you want to format it?” seriously I do not want to format it as that means I lose all my crucial data. So please provide me an alternative to fix you need to format the disk before using it fix raw error message effectively.”

How Can I Fix Need to Format Disk Raw Error Manually?

When you get this error message and wants to get rid of from this problem, try below-listed solutions first. All the workarounds are discussed in the descriptive manner which is easy to follow and fix the error you need to format the disk in drive raw:

Workaround 1: Insert the Drive-in Other USB Port

There are possibilities that the USB port which you plug the external hard drive in is to blame. Probably the USB port is corrupted or something else happens to it. Thus, you can plug the drive in another port to check whether the error message is gone. If the error continues, turn to the next workaround.

Workaround 2: Check Hard Drive For Errors Using CMD

  • Initially, select the “Start” button and hit on “Run”.
  • Now, type “cmd” in the field and hit “Enter” key.
  • Here, add “chkdsk n:/f” in the “Command Prompt” wizard after that press the “Enter” key.
  • Lastly, it will begin repairing damaged files and you will see some of your file names before it finally asks if you need to save lost chains in other location. When it is finished, you can again try to read your external drive after restart your PC.

Workaround 3: Using Anti-Virus Scan The Drive to Fix Need to Format Error

Another potential possibility is that the drive is badly affected by virus and malware. Therefore, you can run appropriate and reliable anti-virus software on your computer to scan the drive. If viruses get detected, scan them right away and retry to access the drive. If no virus is detected, you have no choice but to allow the error messages such as format the drive.

Workaround 4: Format It and Retrieve Data from Backups

When you get this error messages so, first you have to take backup instantly. Once you follow its command to format the disk, you have to continue data recovery. The best and most perfect case is that you have backed up your data immediately. It means that you are holding an existing data backup. In this case, you can easily recover your data from backups.

Note: – If none of the above solutions works for you, then forcefully you have to format the hard disk. After formatting, all files and folders will be erased from the disk. So, it is recommended that before formatting the disk. First, recover all data files. The complete guide listed below.

First Save Your Files & After That Format The Disk to Fix Error

There are multiple ways are present to repair this format the disk raw error. But there is no surety to get positive outcome using these manual solutions. So, here we come up with a secure solution to save your files first using Hard Drive Data Recovery Software.

 With the help of this tool, a user can easily and simply retrieve files. This recovery software is capable enough to scan the formatted disk within a few clicks. It is equipped with advanced features and functionalities. Moreover, it fixes this tiresome error without losing a bit of data.

Use this software to secure your files and after that format the disk to fix you need to format the disk before you can use it raw.

Step by Step Guide to Execute Recovery Procedure:-

Step 1: Interface of Tools hard drive recovery software as you install it into your local machine.

Step 2: Now, scan the specified drive of the system hard drive, click on Formatted Scan to recover files after formatting the hard drive.

Step 3: After scanning, you can view files and the folders.

Step 4: At last, a user can extract selected files and folders and Save.

Summing Up

In this article, we discussed the methods to fix format the disk raw error. When a user faces this kind of desktop and hard drive related issues. Then they require an ultimate solution to resolve you need to format the disk before using it fix raw. In the above segment, we have also discussed the various ways to fix you need to format the disk USB raw error. But, in the manual technique, there are some limitations like it may permanently delete user’s crucial data. Hence, users can opt for a third party application to repair the issue simply and conveniently. Moreover, a user can select any one of them. They can use as per their requirement for You Need to Format The Disk Raw error.

News Reporter
This article has been shared by Tarun Gupta who is a blogger and software engineer and loves to share his knowledge and experience.